These elements automatically control your signal and provide the best signal condition for every output. You will get perfect signal without clipping or distortion. You can switch this element on or off for each input depending your needs.

A signal generator, also called a test signal generator is an electronic device designed to produce sine signal – frequency of 1kHz, which can help to set your levels correctly.

Every multi-input AudioPressBox® offers possibility to extend its output section with Extenders APB-024 R-EX. You can route signal to 2 independent groups of extenders.

If you have ordered AudioPressBox® with rechargeable battery option, accumulator is already built in the device and you don’t have to buy any extra batteries. Just recharge and go anywhere. Don’t forget, you can run on these batteries up to 10 hours of full load!

We offer rack version of all AudioPressBox® devices, so you can install your AudioPressBox® into standard 19” rack with 2U high input module and 2U high output module with 24 outputs. For installation on the wall, we can provide you smaller modules in a custom design, where you can chose number of outputs or design/color of the unit.

Portable versions of AudioPressBox® offer cascading option via Input link connector, which provides the same signal as AudioPressBox® receives directly from the microphone’s input. You can connect two or more portable Audio Press Box® devices together to offer more than 20 outputs and set signal processing and levels for each AudioPressBox® independently.

AudioPressBox® devices are prepared to integrate with other devices for your pressrooms, conference systems or to be completely portable. Just plug your microphone/line input to your AudioPressBox®, set levels and you are all set.

All you need to do is plug your microphone in, switch AudioPressBox® on, set levels and you are ready to distribute high quality signal for all the recipients.

Yes, you can connect your mixing console output to AudioPressBox®. With the mixing console you can connect as many microphones or inputs as console’s parameters allow you to use. AudioPressBox® gives you the perfect signal condition for all recipients.

This website presents the product intended for usage in the U.S. environment. European countries have no different requirements except the mains voltage and the power plug. Explore our product portfolio and feel free to contact us to find out what you are looking for.

Our professional design team can customize AudioPressBox® just how you want to have it. You can specify number of inputs, number of outputs, rechargeable battery option, device type, extender option, color etc.

You will receive an email to confirm your order. It depends on the type of custom design should be. Usually it takes 30 working days to create the AudioPressBox® to fit your needs.

There are no restrictions on international sales and deliveries. We ship worldwide anytime.

To become a reseller just write us at sales@audiopressbox.com. We will contact you back with all information needed for reselling.