Handle
AudioPressBox
APB-112 OW-D-USB
Professional, on wall, active, AudioPressBox unit with 1 channel DANTE input, 8 LINE/Mic outputs and 4 USB-C outputs. It is powered via PoE so you need only 1 cable for the signal and power. The easy install allows for quick setup.
- 1 channel DANTE input - RJ45
- 8 high quality balanced and individually transformer isolated outputs
- 4 Digital USB-C outputs
- Each XLR Output is switchable between MIC or LINE output level
- The unit is powered only via PoE from DANTE network
- Thanks to DANTE patching you can easily expand number of channels or number of outputs by adding other APB-112 OW-D or APB-112 OW-D-USB units
- AudioPressBox delivers audio in broadcast quality
Watch for more details
Ecosystem
Dante Controller
Applications
Specification of APB-112 OW-D-USB
| Type | 1 In 12 Out |
| Groups | 1 |
| Input section | |
| Inputs | 1 |
| Input connectors | RJ45 - Dante |
| PoE Requirement | YES |
| Reference level | -18dBFS |
| Analog outputs | |
| Outputs | 8 Line/MIC level |
| Output connectors | Balanced, XLR |
| Nominal Output Level | +6dBu |
| Maximum Output Level | +20dBu (no load) ; +14dBu (600Ohm) |
| Output impedance | Mic: 220 Ohm ; Line: 600 Ohm |
| Transformer isolated outputs | Yes (each output) |
| SNR | >70 dB |
| Frequency Response | 25Hz to 20kHz/-3dB |
| Digital Outputs | |
| Output connector | USB Type C |
| Compliant USB Specification | USB 2.0 |
| Supported Sampling Rates | 8kHz, 11.025kHz, 16kHz, 22.05kHz, 32kHz, 44.1kHz, 48kHz |
| Bit Depth | 16-Bit |
| Interface Powering | Bus powered (from connected USB host device) |
| Charging capability | No |
| Indicators | |
| Output section: | Output level. Power |
| Power | |
| Power Supply | PoE (Type 1, Class 3 (12,95W)) |
| Mechanical | |
| Dimensions (WxHxD) | 280x138x54mm |
| Weight | 2400 g |
Block diagram
More Products
Contact us
Do not hesitate to get in touch with us. We are here to answer any questions or requests you might have.