AudioPressBox
APB-D116 R-D

Active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders

1-channel active drive unit features 1 Analogue and DANTE input with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs. It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear. Front outputs are balanced and individually transformer isolated with selectable output level for each output.

You can expand the number of outputs with AudioPressBox expanders with up to 24 additional Line/MIC outputs per channel. As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists. APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

PoE Power Consumption: < 2 Watt

CAUTION– If using a PoE injector, it must be IEEE 802.3af compliant. Use of a non-compliant PoE injector can terminally damage the device and may void the warranty.

Drive unit for : APB-008 SB-EX, APB-008 IW-EX, APB-008 OW-EX, APB-008 FB-EX, APB-024 R-EX, APB-P008 OW-EX, APB-P008 IW-EX, APB-P112 SB-EX

1 Balanced LINE Input – XLR / 6.3mm JACK
1-channel DANTE input with high-quality digital-to-analogue converter
You can switch between Line or Dante input, depending on your needs
16 High quality balanced, individually transformer isolated outputs
Each Output is switchable between MIC or LINE level
Switchable High-Pass filter for each Input channel
Switchable Compressor and Limiter for each Input channel
1 separately buffered Output that can drive 3x APB-008 or 1x APB-024 Output expanders
Maximum drive capacity is 24 Line/MIC Outputs
Total maximum of 16+24 Line/MIC Outputs
AudioPressBox delivers audio in broadcast quality

Features

HPF (High Pass Filter) This button helps to avoid distributing low-end rumble like a microphone handling noise or pops. You have 2 options – full range or 160Hz low-cut frequency. The one you choose depends on the sound, you want to filter out.

COMP (Compressor/Limiter operation button) To provide perfect output signal without clipping or distortion, you can switch the Comp button ON. If you switch this OFF, signal in output could contain signal clipping or distortion.

Transformer Separately transformer isolated outputs.

2 buffered expander outputs for AudioPressBox expanders.

24V DC Power Supply

2-channel Dante interface

Watch for more details

Applications

Specification of APB-D116 R-D

Type	1 in 16 out
Groups	1
Input section
Inputs	1
Input connectors	Balanced, XLR / 6.3 mm JACK, RJ45-Dante
Max. input level	Line: +32/+2 dBu
Phantom Voltage	48V
Input Impedance	>5kOhm
Output section
Outputs	16 Line/MIC level, 1 buffered output for expanders (max 24 Line/MIC outputs)
Output connectors	Balanced, XLR

Nominal Output Level	+6dBu (front outputs)
Maximum Output Level	+20dBu (no load) ; +14dBu (600Ohm)
Output impedance	Mic: 220 Ohm ; Line: 600 Ohm
Transformer isolated outputs	Yes (each output)
SNR	86dB at 0dB Gain ; 78dB at +20dB Gain
Frequency Response	20/160Hz (ﬁlter) to 36kHz/-3dB (front outputs)
Controls	Input gain, Dante switch, High-pass ﬁlter, Compressor, Output PAD
Indicators	Input clip, Dante, Output level, Gain reduction, Power
Power Supply	24V DC, 1A external adaptor
Dimensions (WxHxD)	2 RU, 480x135x90mm
Weight	3410 g